Barcode / Label Printer Back

TEC B-472

Rugged Industrial Design
The B-472's rugged construction is designed for the harshest environments, yet is attractive for office and store environments as well. The internal media supply is protected from dust and dirt.
Speed, Flexibility, Versatility and Power
High speed printing up to 10 inches per second
Prints thermal transfer and thermal direct
Non-stop ribbon save (option) inhibits ribbon feed during non-print with no loss of throughput
Maximum print width: 4.1"
Maximum print length: 35"
The B-472's edge reflective sensor detects notches, punched holes and black marks -- The transmissive sensor detects label gap; continuous form material may also be used
Standard RS-232C interface


SPECIFICATIONS

Head Specifications
Print Speeds Picket fence barcodes, graphics, and characters at 10 inches per second (254mm)
Resolution 203.2 dots per inch square (8dots per mm)
Head width 4.7 inches wide (120mm)
Maximum print width 4.1in (104mm)
Maximum print length 35.4in (898mm)

Physical
Heigh 12.1in (308mm)
Width 11.4in (291mm)
Depth 18.1in (460mm)
Weight 37.4 lbs (17kg) (without label and ribbon)

Environmental
Power Requirements 120 VAC, 60 Hz
Regulatory Compliance FCC Class A, UL, CSA
Operating 41° to 104°F (5° to 40°C)
25 to 85% non condensing relative humidity
Interface
 Standard RS-232C interface

Media
Media width range 2.0 to 5.5in (50.8 to 140mm) including the backing-paper
Media length range 0.4 to 39.3in (10 to 999mm) - batch 1.0 to 39.3in (25.4 to 999mm) - strip or cut
Media thickness range 5.9 to 11.4mil (150 to 290 micron)
Label roll capacity 7.9in (200mm) maximum OD 3.0in (76.2mm) minimum ID
Ribbon type one-time carbon; normally black, but colors are available
Standard ribbon widths 2.7in (68mm); 4.4in (112mm)
Maximum ribbon length 1,968ft (600m)

Options
Cutter module (cutter type shown right)
On-demand strip and peel module
Ribbon save module
Centronics, PCMCIA, ext. I/O board
High speed PC interface board
Printer List